Heavy-duty overhead cranes can be a valuable tool in the workplace. As long as they are used correctly, they provide a safe and efficient way to move objects that are too heavy to lift by hand or that are too bulky to move through other means.
Like other types of equipment, however, these cranes can be dangerous when proper safety procedures are not followed. To prevent any accidents or injuries in the workplace, it is important that all crane operators are trained on how to use these cranes correctly. Below are some safe operation tips for heavy-duty overhead cranes.
1. Always verify that the area is clear before using the crane.
Some of the most common crane-related injuries involve loads falling on people who are standing or walking underneath them. These accidents can easily be prevented by making sure that there is no one in the immediate vicinity of the crane while it is in operation.
Not only does the crane operator need to carefully check the area for people but there should also be warning lights or sounds that alert people in the area that the crane is in use. That way, they won’t inadvertently walk into the area where it is used.
2. Make sure the crane is properly maintained.
Never operate a crane that is in disrepair or that has not been cared for properly. Accidents are far more likely to occur when the equipment is in bad shape. Regularly inspect it, looking for signs of wear or damage. Replace any parts on an as-needed basis. Make sure to follow the manufacturer’s recommendations in terms of ongoing maintenance. The better job you do of maintaining your crane, the less likely problems are to occur.
3. Always make sure that loads are secure before turning the crane on.
Crane operators need to be trained in how to properly secure loads. Loads that aren’t attached securely to the crane can fall, causing damage, injuries, or death. It is absolutely essential that all loads are checked and rechecked before being lifted up in the air.
4. Make sure employees are properly trained.
Anyone who operates the crane should be specially trained as a crane operator. Don’t allow general employees to use the crane without proper training.
5. Use a safety checklist to make sure that everyone is on the same page.
Create a checklist for your employees that needs to be followed every time the crane is used. This checklist should include all of the steps that need to be taken to ensure that the crane is safe to use. http://overheadcranesmanufacturer.com/heavy-duty-overhead-crane/
This includes everything from performing the initial check to make sure the area is clear and that the equipment is in good shape to making sure that the load is secure and verifying that the crane is not overloaded. Make sure that employees go through this checklist each and every time that they use the crane.
These tips for safe operation are essential if you have a heavy duty overhead crane at your place of business. Make sure that all of your employees are familiar with them.